Skip to content
Call (773) 453-4770

Roofing

Roof Replacement in Chicago

Alderline Exteriors replaces roofs on residential and commercial properties throughout Chicago's north and northwest side and nearby suburbs, from aging shingle roofs to flat and low-slope systems. We plan each replacement around the building and put the scope in writing before work begins.

A pitched-roof replacement typically includes:

  • Tear-off
  • Deck check
  • Underlayment
  • Shingles
  • Ventilation

Overview

When a Roof Needs Replacing

Not every aging or damaged roof needs a complete replacement. However, widespread deterioration, recurring leaks, storm damage, or problems with the underlying roof structure may make replacement the more practical long-term solution. We evaluate the roof's condition and explain the available options before recommending the next step.

The signs below are reasons to have the roof professionally evaluated, not proof on their own that it must be replaced. Sometimes a roof repair is the better answer.

  • Curling or cracked shingles

    Shingles that have lost their shape or granules across the roof, not just in one spot.

  • Repeated roof leaks

    Leaks that come back in new places after repairs.

  • Soft or sagging decking

    Signs that water may have been reaching the wood under the shingles.

  • Widespread storm damage

    Hail or wind damage spread across several slopes of the roof.

Options & materials

A Complete Roof System, Not Just Shingles.

A new pitched, asphalt-shingle roof includes the layers underneath and the details at the edges. We walk you through each one in the estimate. Replacing a flat or low-slope roof? See Flat Roofing, where TPO, EPDM and torch-down modified bitumen systems are explained.

  1. Ice & Water Protection

    01

    Self-adhering membrane protection at vulnerable roof areas, including eaves and valleys, where required by the roofing design and applicable standards.

  2. Underlayment

    02

    A protective layer installed beneath the shingles to provide additional resistance against water intrusion.

  3. Flashing

    03

    Properly installed flashing at roof penetrations, walls, chimneys, valleys, and other critical transitions.

  4. Ventilation

    04

    Appropriate intake and exhaust ventilation for applicable roof assemblies, helping manage attic heat and moisture.

  5. Drip Edge & Trim

    05

    Roof-edge components designed to direct water away from vulnerable edges and toward the gutter system.

A Clean Job Site.

We take care to protect surrounding areas, organize materials, and manage debris throughout the project. Once the work is complete, we clean the job site, check accessible areas for roofing debris and nails where applicable, and review the finished work with the property owner.

What you get

The benefits of doing roof replacement right.

  1. A Complete Roofing System

    Roofing materials, underlayment, flashing, ventilation where applicable, and roof-edge details are planned to work together.

  2. Decking Inspected During Replacement

    Once existing roofing materials are removed, accessible roof decking can be evaluated. Any additional repairs are explained before proceeding with work outside the approved scope.

  3. Protection Against Chicago Weather

    Flashing, ventilation and roof-edge details help a roof handle Chicago's snow, rain, wind and freeze-thaw cycles.

How we install

Every step, before it happens.

You know what happens next, who is on site and what you are approving, from the first visit to the final walkthrough.

  1. Inspection & Measurements

    We inspect the existing roof, evaluate visible conditions, and take the measurements needed to develop a replacement plan.

  2. Written Estimate

    You receive a written estimate explaining the proposed materials, work scope, and project details.

  3. Planning & Scheduling

    We coordinate the project schedule, material selections, installation requirements, and any permit the work requires.

  4. Removal & Deck Inspection

    Existing roofing materials are removed as specified, and exposed decking is inspected for conditions that may require attention.

  5. Roof System Installation

    We install the selected roofing system, including underlayment, flashing, roof edges and ventilation where applicable.

  6. Cleanup & Final Walkthrough

    We clean the work area and review the completed roof replacement with you.

The Alderline difference

What we do differently on this kind of job.

  1. Replacement Recommendations Based on Condition

    We evaluate the existing roof and explain why replacement may be appropriate rather than automatically recommending a new roof.

  2. Flashing & Transitions

    Roof penetrations, edges and wall transitions are written into the replacement scope.

  3. Clear Documentation

    Any unexpected conditions discovered during the work are documented and discussed before additional work is approved.

  4. Organized Project Execution

    We protect the property, keep the site organized, keep you updated and finish with a final walkthrough.

FAQ

Common Roof Replacement Questions

How do I know whether my roof needs replacement?

Widespread curling or cracked shingles, leaks that keep returning, soft or sagging decking, and storm damage across several slopes are common reasons to have a roof evaluated. An inspection shows whether the problems are spread across the roof or limited to specific areas, and we explain what we find with photos.

Can my existing roof be repaired instead?

Often, yes. When damage is limited to specific areas, such as flashing, a section of shingles or a roof penetration, a targeted roof repair may be the better choice. We explain the options and our reasoning either way.

How long does a typical roof replacement take?

A typical residential asphalt shingle roof replacement generally takes approximately one to three days. That is an estimate: larger or more complicated roofs, weather, and unexpected conditions found once the old roofing is removed can affect the timeline. We share an expected schedule with your estimate and keep you updated as work progresses.

Do I need a permit for a roof replacement?

It depends on the municipality and the scope of work. Some communities do not require a permit for a residential roof replacement, while others do, and rules differ for structural work and flat roofs. When a permit is required for our work, Alderline takes care of obtaining it. Our service area pages note the local rules for each community.

What happens if damaged roof decking is discovered?

Decking can only be fully evaluated once the old roofing is removed. If we find damaged boards, we document them with photos and explain the repair before proceeding with any work outside the approved scope.

Do you replace flat and low-slope roofs?

Yes. Flat and low-slope roofs use different systems from shingle roofs, such as TPO, EPDM and torch-down modified bitumen. See our Flat Roofing page for how we approach them.

Do you provide roof replacement for commercial properties?

Yes, we can discuss commercial roofing projects. Many commercial buildings have flat or low-slope roofs, which are covered on our Flat Roofing page. We assess each building and recommend a system based on its condition and requirements.

Roof Replacement near you

Chicago's north and northwest side and the suburbs next door. Pick your town for local notes on housing, weather and permits.

Related services

Start your project

Let’s Elevate Your Exterior.

Considering a roof replacement? Alderline Exteriors can help you evaluate your roof's condition, understand your options, and plan the next steps with a clear written estimate.

CallRequest an Estimate